Description
This is a complete titanium bolt kit for the Stanton SR-11x Midget engine. This kit will save you 2 pounds compared to a standard bolt kit. Contents are listed here:
Valve Cover – 8) ¼-20 – ¼ – 28 x 1.285 studs; ¼ – 28 12 pt. titanium nuts; ¼ stainless steel washers and 2) 5/16 – 18 – 5/16 – 24 x 1.09 studs; 5/16 – 24 12 pt nuts; 5/16 – 24 stainless steel washers
Injector Mounting Bolts – 1) 3/8 – 16 x 1-1/4 12 pt. bolt; 3/8 titanium washers and 6) 3/8 – 16 x 1 12 pt. bolt; 3/8 titanium washers
Idler Bracket – 4) 3/8 – 16 x 1-1/4 12 pt. bolts; 3/8 titanium washers
Idler Pulley – 1) 1/2 – 20 x 3 reduced hex head; 1/2 – 20 titanium jet nut; 1/2 titanium washer
Water Pump Bracket – 3) 3/8 – 16 x 3-1/2 hex head and 1) 3/8 – 16 x 4 hex head and 4) 3/8 titanium washers
Crank Shaft Bolt – 1) 1/2 – 20 x 5 hex head and 1/2 – 20 titanium washer
Cam Pulley – 1) 7/16 – 20 x 1-1/2 reduced hex head drilled
Cam Hub – 5) 1/4 – 20 x 3/4 12 pt. bolts and 1/4 stainless steel washers
Trigger Wheel – 3) 5/16 – 18 x 1/2 hex heads and 5/16 stainless steel washer
Water Pump and Water Pump Housing – 5) 516 – 18 x 3/4 12 pt. bolts (uses 3/8 wrench)
Oil Pump – 4) 5/16 – 18 x 1-1/4 12 pt. bolts
Pillar Block – 2) 516 – 18 x 3/4 12 pt. bolts (uses 3/8 wrench) and 5/16 titanium washers
Oil Filter Mount – 2) 5/16 – 18 x 3/4 12 pt. bolts (uses 3/8 wrench) and 5/16 titanium washers
Water Manifold – 8) 1/4 – 20 x 5/8 12 pt. bolts
Coil Mount – 2) 5/16 – 18 x 3/4 12 pt. bolt (uses 3/8 wrench) and 5/16 titanium washers
Seal Adapters – 8) 1/4 – 20 x 5/8 12 pt. bolts
Coil to Mount – 4) 5/16 – 18 x 3/4 12 pt. bolts (uses 3/8 wrench) and 5/16 titanium washers
Oil Pan – 10) 1/4 – 20 x 5/8 12 pt. bolt and ¼ stainless steel washers
Oil Pressure IN Fitting – 7) 10/32 x 3/8 SHCS
Header Studs – 6) 3/8 – 16 – 3/8 – 24 x 1.210 studs